Simply Connected User Guide XWR-1750 Dual Band Wireless AC1750 Gigabit Router Use the XWR-1750 to: Deliver Next Generation 802.11ac Gigabit Wi-Fi with Speeds up to 1750Mbps Maximize Data Rates with Concurrent Dual-Band Technology Optimize VoIP, Streaming Media and Other ...
No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
1 PRODUCT OVERVIEW 1.1 Product Introduction The Luxul XWR-1750 Wireless Router is a feature rich network device designed to enhance the performance, security and reliability of a home or commercial network. It enables simple monitoring, management and control of network usage to boost effi...
Indicates the XWR-1750 will not boot. Power LED Indicates power is applied to the XWR-1750. Indicates power is not applied to the XWR-1750. Luxul LED Unused at this time a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Web Browsers: Supported Web browser versions include I.E. 9, Firefox 25, Safari 5, Chrome 30, and up. The Web browser is used to confi gure the XWR-1750. Internet: Broadband Internet Service (depending on the service provider, a separate ...
IP value be maintained. 2.6 Connecting a Client Device Connect a client device to one of the XWR-1750 LAN ports or to a switch that is connected to an XWR-1750 LAN port. Connect a wireless client device to one of the wireless SSIDs (Luxul17502G or Luxul17505G).
This means the device is connected with a valid IP address. 3 CONFIGURATION This chapter introduces the configuration of the XWR-1750 Enterprise Multi-WAN Router functions via the Web-based management interface. Quick Setup ...
Page 10
WAN IP, WAN Subnet Mask, WAN Gateway, WAN Primary DNS and WAN Secondary DNS from the ISP’ s Modem once the Router is successfully Authenticated. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 12
Connection Type: Select the desired WAN Connection Type. When set to Static IP, you must enter the IP information that the ISP provides allowing the Router to connect. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 13
MAC Address of the first device used to setup Internet Service and cannot be reset by the user. If this occurs you can clone that setup Device’ s MAC Address to allow the XWR-1750 to connect to the Modem. Custom MTU: Allows you to configure a Custom MTU setting. MTU (or Maximum Transmission Unit), is the maximum packet size allowed on the network.
Page 14
LAN IP Address: Allows you to configure the LAN IP of the Router, this will be used by all devices in the LAN as the Default Gateway. If you are installing other Luxul devices, we recommend keeping the default IP of 192.168.0.1.
Wireless Connections. Click a submenu to view and/or modify the corresponding settings. 3.2.1 Overview This page displays the System, Internet / WAN Settings and Local Network / LAN Settings configured on the Router. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 17
User Guide Select the menu Status>>Overview to display the following page: System: Displays the XWR-1750 System properties. Firmware Version: Displays the Version of Firmware running on the Router. Hardware Version: Displays the Hardware Version of the Router. CPU Usage: Displays the percentage of CPU Cycles currently occupied.
Page 18
This Page displays the Client Devices that have requested a DHCP Address from the XWR-1750. Select the menu Status>>Connected Clients to display the following page: a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 19
DHCP Address from the Router. 3.2.3 Wireless Connecitons This Page displays the Client Devices that connected wirelessly to the XWR-1750. Select the menu Status>>Wireless Connections to display the following page: SSID: Displays the SSID (Wireless Network Name) and Wireless Mode.
Start: Allows you to set the Starting IP Address of the DHCP Pool. 192.168.0.100 is the default setting. End: Allows you to set the Ending IP Address of the DHCP Pool. 192.168.0.200 is the default setting. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 22
Reboot button for the changes to take effect. You can click the Add/Update/Delete buttons and proceed to other pages without losing your configured changes. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
3.4 Wireless There are three submenus in the Wireless menu: Settings, Profiles and WPS. Click a submenu to view and/or modify the corresponding settings. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 26
3.4.2 Profiles This menu displays the Wireless Profile options for 2.4GHz and 5GHz on the Router. 3.4.2.1 2.4GHz a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 28
NOTE: WEP Security is not recommended due to the Security being inherently insecure. WEP is only recommended when devices do not support WPA. 3.4.2.2 5GHz a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 30
Hotels. This mode covers the widest range of devices. NOTE: WEP Security is not recommended due to the Security being inherently insecure. WEP is only recommended when devices do not support WPA. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 32
Hotels. This mode covers the widest range of devices. NOTE: WEP Security is not recommended due to the Security being inherently insecure. WEP is only recommended when devices do not support WPA. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 34
Router. Disabled is the default setting. Enabling the DMZ and entering a Local Device IP Address, will Disable all Incoming Firewall Rules for the specified Device. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 36
Select the menu Firewall/Security>>URL Filtering to display the following page: This feature is under construction. To be notified of Firmware Releases including new features please Join our Mailing List at http://luxul.com. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Select the menu Firewall/Security>>Client Filtering to display the following page. This feature is under construction. To be notified of Firmware Releases including new features please Join our Mailing List at http://luxul.com. 3.7 QoS QoS (Quality of Service) Allows you to specify at what Priority (Normal, Priority, Express or Bulk) a packet is forwarded.
Page 38
Del: This button allows you to Delete the selected QoS Rule and Saves the changes, allowing you to browse to any other setup page. Most changes will require a Reboot to allow the changes to take effect. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 40
Remove: This button allows you to Delete the selected VPN User and Saves the changes, allowing you to browse to any other setup page. Most changes will require a Reboot to allow the changes to take effect. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Select the menu VPN>>L2TP to display the following page: This feature is under construction. To be notified of Firmware Releases including new features please Join our Mailing List at http://luxul.com. 3.9 Administration There are six submenus in the Administration menu: Admin Password, Firmware Update, Factory Defaults, Backup/Restore, System Log and Set Time.
Page 42
Admin Password. 3.9.2 Firmware Update This page displays the Firmware Update of the Router. Select the menu Administration>>Firmware Update to display the following page: a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 44
Router. It will not remove Firmware Updates. NOTE: If after Enabling WAN Acceleration your Internet connection becomes unstable, please Disable WAN Acceleration. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 46
Reboot: This button is used to Reboot the Router after Configuration Restore. NOTE: Restore Configuration will overwrite any changes made after the file was generated. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
3.10.1 Iperf This page displays the Iperf settings of the Router. Select the menu Tools>>Iperf to display the following page: a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Select the menu Tools>>USB to display the following page: This feature is under construction. To be notified of Firmware Releases including new features please Join our Mailing List at http://luxul.com. 4 REGULATORY COMPLIANCE The device complies with internationally recognized standards covering human exposure to electro- magnetic fields from radio devices.
Page 50
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Page 51
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that this Luxul device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For a copy of this report send a self addressed stamped envelope to: Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Displays the entire path and IP address of each node in the path and total elapsed time. Must be run from the command line. a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450 LUX-UG-XWR-1750 Vers: 022515...
Need help?
Do you have a question about the XWR-1750 and is the answer not in the manual?
Questions and answers