Installation Location - Panasonic KY-E227D Installation Instructions

Related Dimensions
Secure clearance for ventilation in the cabinet.
Side view
Intake
* More than 40 cm
2
of total clearance area
• If the front countertop has a bulge
Bulge
More than 25
for fl at part
Dimensions of countertop cutout
Cut according to the template included
with the appliance.
If a partition board without an intake part has been set
Cut both ends of the partition board or make holes using a holesaw.
More
than 100
4
(Built-in)
(unit: mm)
More than 470
368 +3 (Depth of mounting hole)
−0
Exhaust vent
Flow from intake to exhaust
If this condition is not met,
do not install the appliance.
+
R3
−
710 +3
−0
Cabinet front
Countertop
Partition
board
Holes
(approx. Φ 100×8)

Installation Location

Observe related laws for installation.
For incombustible wall and ceiling (metal, tile, brick, etc.)
• Including heat-insulating board made of metal, tile , brick, etc.
Built-in
Min. 70 cm Min. 70 cm
clearance to clearance to
the ceiling the ceiling
Min. Min.
0 cm 0 cm
1
Built-in
Min. 100 cm Min. 100 cm
clearance clearance
to the ceiling to the ceiling
Min. Min.
5 cm 5 cm
Free-standing
Min. 70 cm Min. 70 cm
clearance to clearance to
Min. Min.
the ceiling the ceiling
0 cm 0 cm
Min. Min.
1 cm* 1 cm
* An exhaust vent is provided on the
back of the appliance.
For combustible wall and ceiling
Free-standing
Min. 100 cm Min. 100 cm
clearance clearance
Min. Min. to the ceiling to the ceiling
5 cm 5 cm
Min. Min.
5 cm 5 cm
Min. Min.
0 cm 0 cm
Min. Min.
5 cm 5 cm
5