Code 39 Fixed Length 1 - PSC Magellan 2300HS Reference Manual

Programming

Code 39 Fixed Length 1

NOTE
5-200
This feature specifies Code 39 first fixed length.
This applies when Code 39 Length Control is set to fixed-length
decoding.
The minimum decodable length is four when an optional check charac-
ter is present.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired fixed label length. The selectable range for this
option is 00 to 50. Pad all single digit numbers with a leading zero
to yield a two-digit entry (00-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODE 39 FIXED LENGTH 1
SET CODE 39 FIXED LENGTH 1
Magellan
below. You'll
that rep-
Appendix C
®
2200VS and 2300HS