Functions During Training / Score; Zooming; Left And Right Balance; Taking A Break From Riding - Tacx Bushido T1980 Operating Instructions Manual

Functions during training

Zooming

Training detailed 09:21
Use arrow right in the TRAINING DETAILED screen to zoom in on your illustration for five seconds so
4,2 0,0 -2,5
you can see which routes are next.

Left and right balance

You will see a horizontal bar in the bottom part of the screen. This bar shows the difference in power
1 2 3
supplied by the left and right leg. The smaller this difference is, the smaller the light middle area will
km/h W
be. If the middle area is larger, it is an indication that your pedal stroke is not 'round'.
AVS 109 18,7 132 74
CUR 124 23,7 148 79

taking a break from riding

MAX 131 24,2 167 88
If you stop riding before you have arrived at the finish line you will see PAUSE. All of the user's data,
00:12:43 1,15 km 9,1 kJ
as well as his or her opponent's data, will be put on hold. When you start riding again the computer
will calculate everything based on this data.
Training simple 09:21
4,2 0,0 -2,5
1 2 3
km/h W
CUR 124 23,7 148 79
00:12:43 1,15 km 9,1 kJ

Functions during training / score

Route mode
Route mode 09:21
If you wish to adjust the route setting of a program while you are riding you can use
Route 1
3,8
arrow down to do so. Ten seconds after having adjusted the setting it will be automatically implemen-
Slope 3,8 %
ted. Save the new program under a new name when you finish. If you alter the setting during your
Distance 3,1
workout the opponent will be deleted.
Error reports while riding
km/h W
AVS 109 18,7 132 74 Go to www.tacx.com
CUR 124 23,7 148 79 to date explanations on what to do if an error code appears on your screen.
MAX 131 24,2 167 88
EN
00:12:43 1,15 km 9,1 kJ
ViEW LaSt SCORES
Select score
rolling_hills
01:12:48
Through MENU › VIEW LAST SCORES you may consult the performances of your last training sessions
time trail 00:24:12
on screen. Use arrow up
prologue 00:14:32
arrow right
to open the complete training data. The Bushido computer has a lot of information stored
bushido1 12,68
in its memory. You can only consult the data on a PC if you are using the Tacx Trainer software from
hill repeats 03:10:53
the T1990 Upgrade PC Bushido, which is not a standard accessory.
12
arrow up
and you will find Bushido's FAQ's under SERVICE. This is where you will find up
or arrow down to select the training that you want to take a look at. Use
13
or
EN
NL
DE
FR