Electronic selection -Tanked or mains plumbed ......................... 5 Operation with Internal Tank ............................. 6 ..........................6 REPARING THE ESUVIUS FOR OPERATION Filling the Vesuvius for the first time..........................6 Flushing the Vesuvius before using ............................ 6 ..................... 7 ESCRIPTION OF THE MAJOR CONTROLS OF THE ESUVIUS Understanding the display &...
Please lock to the 6:00 position or further for safe operation After having removed the packaging, make certain that the Vesuvius is not damaged in any way. If you have any doubts, do not use the Vesuvius and contact a professionally qualified person or your dealer.
4 in total. Note: they are NOT on the top. The Vesuvius is secured to the base using rubber 2. The sides of the crate are secured by 4 transit feet with bots on the bottom that protrude...
Mains Water Connection Routing the safety pressure release vent valve to the water tank, protects both you and the machines The Vesuvius is supplied ready for a mains water electronics if a fault causes any high pressure connection or internal tanked operation.
The pump should not run during this process. Switch 2. Switch on the machine at the mains and the Vesuvius on, allow the service boiler to refill and once the firmware has loaded, turn the repeat this process.
The display now is split into 3 Horizontal zones. functions The top zone shows brew pressure (when brew lever activated), Steam boiler temperature and The Vesuvius has a dot matrix display with much pressure. more information than a standard espresso machine and presented in a slightly different form.
Page 12
Does nothing, touch + to continue This The Vesuvius has an internal On/Off actually timer, with 2 on/off times each day, 7 shows E61 days per week. Touch. This allows the group lever machine to be ready in the morning, off...
The profile screen The profiling system is very easy to use and can The Vesuvius has 5 pressure profiles each with achieve results as simple or complex as you care to up to 7 phases. Touching the "home screen"...
2 bar due to low flow rates from the pump. One of the reasons the Vesuvius always supplies the pump from it's internal tank, is to allow preinfusion pressures lower than mains line pressure (usually much higher than 2 bar).
The Vesuvius is able to use a grind much finer than repeatable control, well beyond that of any lever standard espresso machines and the less expensive machine.
Pressure profiling 5 profiles can be saved each with up to 7 stages. Last shot protection The Vesuvius will always complete the last shot, even if water is low M&V S.r.l. Via L. Guerra, 9 80040 Cercola (NA) Ph./Fax +39 0815552428...
Replace a heating element (with dealer • guidance) The Vesuvius should only be cleaned with non abrasive cleaners and a soft micro-fibre (recommended), cloth In the event of any abnormal operation or problem with the display or main computer: Switch the machine off and unplug it.
Need help?
Do you have a question about the Vesuvius and is the answer not in the manual?
Questions and answers