Kodak PixPRO AZ251 User Manual page 5

A photo taken with the camera will be stored in the
folder that is automatically generated on the SD card.
Do not store photos that are not taken using this
camera in these folders as the pictures cannot be
recognized during the playback.
When you insert a memory card, make sure the notch
of the card matches the markings on the top of the
card slot.
4
Other Safety Notes
Do not disconnect the power or turn the camera
off during the update process. Doing so may cause
incorrect data to be written and the camera may not
power on later.
Do not hang the neck strap of the camera around the
neck of a child.
When using your camera on an airplane, observe the
relevant rules specified by the airline.
Due to the limitations of manufacturing technology,
the LCD may have a few dead or bright pixels. These
pixels do no effect the quality or performance of the
camera, photos or video.
Do not expose the LCD to water. In a humid
environment, only wipe it with a soft and dry cleaning
cloth.
If the LCD is damaged and the liquid crystal comes
into contact with your skin, wipe your skin with a dry
cloth immediately and rinse it with clean water. If
liquid crystal comes into contact with your eyes, wash
them with clean water at least for 15 minutes and
seek immediate medical attention. If you accidentally
swallow liquid crystal, rinse your mouth immediately
and seek medical attention.