Flash Mode
The flash is used to illuminate a subject in low light or for
fill-in lighting to achieve better illumination of a subject
with pronounced shadows.
1. Pop up the flash manually as shown below.
2. Press the right arrow button (
settings menu.
3. Press the left/right to select the following 5 modes:
) to enter the flash
•
Flash Auto
Camera flash goes off automatically based
on existing light conditions.
•
Force Flash
The flash will engage with each shot even
if there is enough available light to take the
photo without flash.
•
Slow Sync.
This allows you to take pictures of people at
night that clearly show both your subjects
and the night time backdrop. The use of a
tripod is recommended when shooting with
this setting.
•
Slow Sync. + Red-Eye
Use this mode for slow synchro shots with
red-eye reduction.
•
Red-Eye Reduction
The camera emits a brief pre-flash before the
picture is taken to reduce red-eye effects.
4. Press the
button to confirm the settings and exit
the option.
39