Advertisement
Available languages
Available languages
Mounting
1. Before mounting check that no parts have been damaged during transport.
2. Unscrew the lock for the armature housing and open the spotlight. Put in the light
source (120 W, R7s, 78 mm) and screw it closed.
3. Mount the stand onto the halogen spotlight.
4. Place the stand on a stable foundation where it cannot tip. Then adjust the angle
of the spotlight.
5. Connect the plug to the wall socket.
Specifications
Article
18-2158 / 36-3812
Type No.
ECLC-HALO-0103D
Voltage
220–240 V AC, 50 Hz
Light source
Max 1 × 120 W, R7s, 78 mm
1.5 m rubber cable H05RN-F 3 × 1.0 mm
Cord
IP44 for indoor and outdoor
IP class
2
3
Advertisement
