Battery - PIAGGIO Beverly 125 User Manual

Hide thumbs Also See for Beverly 125:
Table of Contents

Advertisement

HYGROSCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE SURROUNDING
AIR. IF THE HUMIDITY IN THE BRAKING FLUID EXCEEDS A CERTAIN VALUE,
IT WILL LEAD TO INEFFICIENT BRAKING. NEVER USE BRAKING FLUID KEPT
IN CONTAINERS THAT HAVE ALREADY BEEN OPENED, OR PARTIALLY USED.
Recommended products
AGIP BRAKE 4
Brake fluid
FMVSS DOT 4 Synthetic fluid

Battery (03_19, 03_20)

To access the battery, proceed as follows:
1. Place the scooter on its centre stand;
2. Open the saddle, following the procedure described above, see section "Opening
the saddle to reach the helmet compartment";
3. Remove retainers "A" and cover "B".
The battery is the electrical device that requires the most frequent inspections and
diligent maintenance. The main points of maintenance to be observed are as follows:
03_19
CAUTION
IN ORDER TO AVOID DAMAGING THE ELECTRICAL SYSTEM, NEVER DISCON-
NECT THE WIRING WHILE THE ENGINE IS RUNNING. DO NOT TIP THE SCOOT-
ER TOO MUCH IN ORDER TO AVOID DANGEROUS LEAKAGE OF BATTERY
ELECTROLYTE
.
03_20
46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Beverly 250

Table of Contents