Checking The Brake Oil Level - PIAGGIO Beverly 125 User Manual

WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RIDING, IT IS IMPORTANT
TO MAKE SURE THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
IN ORDER TO GUARANTEE THE PROPER FUNCTION OF THE ENGINE, IT IS
NECESSARY TO KEEP THE RADIATOR GRILLE CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL
coolant
Monoethylene glycol-based antifreeze fluid, CUNA NC 956-16

Checking the brake oil level (03_17, 03_18)

The brake fluid tanks of the front and rear brakes are located on the pumps under the
covers on the handlebar. Proceed as follows:
1. Place the scooter on its centre stand and make sure the handlebar is centred;
2. Remove cover "A" by removing the respective retaining screw "B";
3. Check the fluid level through the respective sight glass "C".
A certain lowering of the level is caused by wear on the pads. Should the level appear
to be below the minimum mark, please contact your nearest PIAGGIO Dealer or Au-
03_17
44