Hardware For Wall Mounting - Jaybeam Wireless 5157120 Installation Manual

Issue 05
Installation Guide for 3G Antennas
8/20
Page

2.3 - Hardware for wall mounting

This accessory is used for installation on wall with ±30° azimuth panning capability.
The figures and part list below describe the kit and how to assemble it on the antenna. The middle
components do not apply to antenna with only pivots at top and bottom.
Note that the bottom pan bracket is reversed compared to the top and middle ones.
For antenna with 3 pivots, mechanical tilt cannot be added to this accessory - a specific accessory has to
be used that includes pan brackets and tilt arms.