1. Manuals
  2. Brands
  3. Jaybeam Wireless Manuals
  4. Antenna
  5. 5157120
  6. Installation manual

Jaybeam Wireless 5157120 Installation Manual

3g
Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation Guide for 3G Antennas
Section 1 - Presentation....................................................................................................... 2
Mounting accessory list..................................................................................................... 3
2.1 - Hardware for pole mounting (standard).................................................................... 4
2.2 - Hardware for pole mounting (large).......................................................................... 6
2.3 - Hardware for wall mounting...................................................................................... 8
2.4 - Hardware for mechanical tilt ................................................................................... 10
2.5.1 - Antennas with two mounting pivot points.......................................................11
2.5.2 - Antennas with three mounting pivot points ....................................................12
3.1 - Hardware for pole mounting (standard).................................................................. 13
3.2 - Hardware for pole mounting (large)........................................................................ 14
3.3 - Hardware for wall mounting.................................................................................... 15
3.4 - Hardware for mechanical tilt ................................................................................... 17
3.5 - Hardware for mechanical tilt on wall mounting....................................................... 18
Section 4 - Installation........................................................................................................ 19
4.1 - General guidelines.................................................................................................. 19
4.2 - Unpacking and checks............................................................................................ 19
4.3 - Antenna installation ................................................................................................ 19
4.4 - Maintenance ........................................................................................................... 20
Document history
Issue
Issue 05
Logo changed. Antennas type 5157120, 5231100, 5232100, 5230100,
5121100 and 5178100 added. Changed photo section 4.3.
Issue 04
Antenna type 5142100 added (page 3)
Issue 03
Mechanical tilt for 5164100 is 0900415/00 instead of 0900412/00
(pages 3 and 17)
Issue 02
Antenna type 5264100 and tilt hardware 0900250/00 added (page 3)
Issue 01
Previous separate guides have been grouped to cover all types of
antennas in one document.
Installation Guide for 3G Antennas
_________
Table of Content
_________
Comments
Issue 05
1/20
Page
Date
09.09.2005
10.03.2005
28.01.2005
24.12.2004
29.10.2004

Advertisement

Table of Contents
loading

Related Manuals for Jaybeam Wireless 5157120

Summary of Contents for Jaybeam Wireless 5157120

  • Page 1: Table Of Contents

    4.4 - Maintenance ......................20 _________ Document history Issue Comments Date Issue 05 Logo changed. Antennas type 5157120, 5231100, 5232100, 5230100, 09.09.2005 5121100 and 5178100 added. Changed photo section 4.3. Issue 04 Antenna type 5142100 added (page 3) 10.03.2005 Issue 03 Mechanical tilt for 5164100 is 0900415/00 instead of 0900412/00 28.01.2005...

  • Page 2: Section 1 - Presentation

    Issue 05 Installation Guide for 3G Antennas 2/20 Page Section 1 - Presentation This guide describes the various installation accessories available for our 3G antennas. Each of them is delivered with an installation drawing. Depending on antenna type, the attachment of the installation accessories is done either on pivot points at the back of the antenna or on mounting plates at top and bottom of the antenna.

  • Page 3: Mounting Accessory List

    Pole brackets Wall brackets Mechanical tilt type mark 48-115 mm 70-150 mm with azimuth pan (Note 1) (Note 2) (Note 0) 5165100 Mounting by pivot 5157120 0900181/00 0900182/00 0900183/00 0900188/00 points at the back 5232100 5163100 5163110 0900181/00 0900182/00 0900183/00 0900184/00...

  • Page 4: Section 2 - Accessories For Antennas With Pivot Points At The Back

    Issue 05 Installation Guide for 3G Antennas 4/20 Page Section 2 - Accessories for antennas with pivot points at the back 2.1 - Hardware for pole mounting (standard) This accessory is used for installation on pipes of 48 to 115 mm diameter. The figures and part list below describe the kit and how to assemble it on the antenna.
  • Page 5 Issue 05 Installation Guide for 3G Antennas 5/20 Page 2 pivots points antenna - Pole mounting 48 to 115 mm - 0900181/00 part list item description quantity item description quantity Pole clamp M8 full nut Antenna bracket M8 x 130 mm hex head bolt Spacing tube M10 x 200 mm hex head screw M8 x 30 mm hex head screw...

  • Page 6: Hardware For Pole Mounting (Large)

    Issue 05 Installation Guide for 3G Antennas 6/20 Page 2.2 - Hardware for pole mounting (large) This accessory is used for installation on pipes of 70 to 150 mm diameter. The figures and part list below describe the kit and how to assemble it on the antenna. The middle components do not apply to antenna with only pivots at top and bottom.
  • Page 7 Issue 05 Installation Guide for 3G Antennas 7/20 Page 2 pivots points antenna - Pole mounting 115 to 150 mm - 0900182/00 part list item description quantity item description quantity Pole clamp M8 full nut Antenna bracket M8 x 130 mm hex head bolt Spacing tube M10 studding 260 mm M8 x 30 mm hex head screw...

  • Page 8: Hardware For Wall Mounting

    Issue 05 Installation Guide for 3G Antennas 8/20 Page 2.3 - Hardware for wall mounting This accessory is used for installation on wall with ±30° azimuth panning capability. The figures and part list below describe the kit and how to assemble it on the antenna. The middle components do not apply to antenna with only pivots at top and bottom.
  • Page 9 Issue 05 Installation Guide for 3G Antennas 9/20 Page The panning device has the following capabilities: -30° pan 0° pan +30° pan The accessory parts list is given below. 2 pivots points antenna - Wall mounting with pan - 0900183/00 part list item description quantity...

  • Page 10: Hardware For Mechanical Tilt

    Issue 05 Installation Guide for 3G Antennas 10/20 Page 2.4 - Hardware for mechanical tilt This accessory is used to add mechanical tilt capability to the mounting accessories described above for installation. The part number for the mechanical tilt hardware depends on the antenna type because each tilt indicator label on one of the scissor arms differs for various lengths of antennas.

  • Page 11: Hardware For Mechanical Tilt On Wall Mounting (Three Mounting Points Version)

    Issue 05 Installation Guide for 3G Antennas 11/20 Page 2 pivots points antenna - Mechanical tilt kit - 0900184/00 or 0900188/00 part list item description quantity item description quantity Long scissor arm M8 x 130 mm hex head bolt Short scissor arm M8 plain washer Spacing tube M8 full nut...

  • Page 12: Antennas With Three Mounting Pivot Points

    Issue 05 Installation Guide for 3G Antennas 12/20 Page 2.5.2 - Antennas with three mounting pivot points The accessory p/n 0900533/00 is dedicated only to antenna with 3 pivots at the back. It is used for installation on wall with ±30° azimuth panning and mechanical tilt capability. It includes the three panning brackets.

  • Page 13: Section 3 - Accessories For Antennas With Mounting Plates At Top And Bottom

    Issue 05 Installation Guide for 3G Antennas 13/20 Page Section 3 - Accessories for antennas with mounting plates at top and bottom 3.1 - Hardware for pole mounting (standard) The accessory p/n 0900390/00 is a set of two pole brackets for installation on pipes of 48 to 115 mm diameter.

  • Page 14: Hardware For Pole Mounting (Large)

    Issue 05 Installation Guide for 3G Antennas 14/20 Page 3.2 - Hardware for pole mounting (large) The accessory p/n 0900503/00 is a set of two pole brackets for installation on pipes of 70 to 150 mm diameter. The figures and part list below describe the kit and how to assemble it on the antenna. 0900503/00 part list item description...

  • Page 15: Hardware For Wall Mounting

    Issue 05 Installation Guide for 3G Antennas 15/20 Page 3.3 - Hardware for wall mounting The accessory p/n 0900408/00 is a set of two brackets for installation on wall with ±30° azimuth panning capability. The figures and part list below describe the kit and how to assemble it on the antenna. 0900408/00 part list item description...
  • Page 16 Issue 05 Installation Guide for 3G Antennas 16/20 Page The panning device has the following capabilities: -30° pan 0° pan +30° pan...

  • Page 17: Hardware For Mechanical Tilt

    Issue 05 Installation Guide for 3G Antennas 17/20 Page 3.4 - Hardware for mechanical tilt on pole mounting The accessory p/n 0900374/00 is a kit that adds mechanical tilt capability to the pole mounting or wall mounting accessories described above. It cannot be used on its own. The figures and part list next page describe the kit and how to assemble it on the antenna.

  • Page 18: Hardware For Mechanical Tilt On Wall Mounting

    Issue 05 Installation Guide for 3G Antennas 18/20 Page 3.5 - Hardware for mechanical tilt on wall mounting For such installation both the panning accessory (see section 3.3) and the mechanical tilt accessory (see section 3.4) need to be used in combination.

  • Page 19: Section 4 - Installation

    Issue 05 Installation Guide for 3G Antennas 19/20 Page Section 4 - Installation 4.1. - General guidelines Each antenna is delivered fully assembled in a single packing carton. Do not stack more than three units high. The antenna has breather/drain holes at its bottom and should be installed with these holes facing downwards.

  • Page 20: Maintenance

    Issue 05 Installation Guide for 3G Antennas 20/20 Page Connection: Important: The antenna positioning should be completed before connecting cables. Fit the jumper cables to the antenna connectors. The "+" and the "-" coaxial ports are interchangeable unless otherwise specified by the operator's requirements. The connection to the antenna should ensure that there is no undue stress on the antenna or its connectors.

This manual is also suitable for:

516310052321005163110523110052641005160100 ... Show all

Table of Contents