Section 1 - Presentation - Jaybeam Wireless 5157120 Installation Manual

Issue 05
Installation Guide for 3G Antennas
2/20
Page

Section 1 - Presentation

This guide describes the various installation accessories available for our 3G antennas. Each of them is
delivered with an installation drawing.
Depending on antenna type, the attachment of the installation accessories is done either on pivot points
at the back of the antenna or on mounting plates at top and bottom of the antenna.
Pictures below help to understand the difference between these two versions:
Mounting by pivot points Mounting by plates
at the back at top and bottom
The table next page provides a sum-up of all available accessories.
Section 2 of this document describes the accessories dedicated to antenna with pivot mounting points.
Most of such antennas have two pivots at top and bottom on the back of the antenna. But some of them
with a big height have a third pivot at the middle of the back. The pictures in this section 2 describe the
accessories when antenna has three pivot points. For the ones with two pivot points, the middle
components should not be taken in account.
Section 3 describes the accessories dedicated to antenna with mounting plates at top and bottom.
Section 4 provides general guide lines for installation and describes how to set the electrical tilt.