Mounting Accessory List - Jaybeam Wireless 5157120 Installation Manual

Antenna
type
5165100
Mounting by pivot
5157120
points at the back
5232100
5163100
5163110
5231100
5264100
5160100
5160110
5265101
(Note 3)
Notes:
Mounting by plates
at top and bottom
5162100
5152100
5182100
5157100
5135100
5230100
5168100
5121100
5178100
5164100
5142100
5146100
Installation Guide for 3G Antennas
Pole brackets
48-115 mm
(Note 0)
0900181/00
0900181/00
0900393/00
0 - Standard pole brackets.
1 - For all antennas, unless otherwise stated, the mechanical tilt accessory is a kit to be used in conjunction with the pole
or wall brackets ordered separately.
2 - The tilt label on one of the scissor arms is marked with a letter to help distinguish between the kits.
3 - These antennas have a third mounting point at the middle of the back.
4 - Cannot be used together with the mechanical tilt kit 0900394/00. Consider the P/N 0900533/00.
5 - Cannot be used together with the wall brackets 0900395/00. Consider the P/N 0900533/00.
6 - This P/N includes wall mounting brackets to be used instead of P/N 0900395/00.
0900390/00
0900390/00
0900390/00
0900390/00
Page
Accessory part number
Pole brackets Wall brackets
70-150 mm with azimuth pan
0900182/00 0900183/00
0900182/00 0900183/00
0900395/00
pan only, no tilt
0900501/00
0900503/00 0900408/00
0900503/00 0900408/00
0900503/00 0900408/00
0900503/00 0900408/00
Issue 05
3/20
Mechanical tilt
(Note 1)
0900188/00
0900184/00
0900394/00
(Note 4) (Note 5)
pole only
0900533
(Note 6)
pan and tilt on wall
0900374/00
0900474/00
0900415/00
0900250/00
Tilt label
mark
(Note 2)
G
B
No letter
C
B
No tilt label