Shoot By Lighting Or Scene Type - Canon EOS M Instruction Manual

Shoot by Lighting or Scene Type

In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot
while the settings match the lighting or scene type. Normally, [
Default setting] is adequate, but if the settings match the lighting
condition or scene, the picture will look more accurate to your eye.
Lighting or Scene
Default setting
Daylight
Shade
Cloudy
Tungsten light
Fluorescent light
Sunset
92
2 3 4 5
k k k k
k k k k
k k k k
k k k k
k k k
k k k
k k k k
1
Select a Basic Zone mode: <2> Select a Basic Zone mode: < Select a Basic Zone mode: <
<3> <4> <5>. > < > <4
2
On the Quick On the Quick On the Quick Control screen,
select the lighting or scene type. select the lighting or scene type. select the lighting or scene type.
Display the Quick Control screen. Display the Quick Control screen. Display the Quick Control screen.
As shown in the figure, tap on [
that [Light/scene-based shots]
appears on the screen.
Tap [Y]/[Z] to select the lighting or
scene type.
With the Q Quick Control screen, the
X
LCD monitor will show how the image
will look with the selected lighting or
scene type.
3
Take the picture.
Press the shutter button.
If you change the shooting mode or
set the power to <2>, the setting
will revert back to [
setting].
4
> < > <
] so
Default