Remote Control Shooting - Canon EOS M Instruction Manual

Remote Control Shooting

Remote Controller RC-6 (Sold Separately)
This Remote Controller enables you to take pictures wirelessly up to
approx. 5 meters/16.4 feet from the front of the camera. You can either
shoot immediately or use a 2-sec. delay.
Set the self-timer to <Q> (p.136).
Point the Remote Controller toward the camera's remote control Point the Remote Controller toward the camera's remote control Point the Remote Controller toward the camera's remote control
sensor and press the transmit button. sensor and press the transmit button. sensor and press the transmit button.
X The camera will autofocus.
X When focus is achieved, the self-timer lamp will light up and the When focus is achieved, the self-timer lamp will light up and the When focus is achieved, the self-timer lamp will light up and the
picture will be taken.
Fluorescent or LED lighting may cause camera misoperation by triggering
the shutter inadvertently. Try to keep the camera away from such light
sources.
Remote Controller RC-1/RC-5 (sold separately) can also be used.
The Remote Controller can also be used for shooting movies (p.177).
Remote Controller RC-5 cannot be used to take still photos in the movie
shooting mode.
Remote control sensor Remote control sensor Remote control sensor
291