Setting Power-Saving Features (Lcd Auto Off, Camera Auto Off) - Canon EOS M Instruction Manual

Handy Features

3 Setting Power-saving Features (LCD auto off, Camera auto off)

If you do not operate the camera for a while, the LCD monitor will turn
off automatically to save power. If you further leave the camera alone,
the camera's power will turn off automatically. You can set the time until
when the LCD monitor turns off and when the camera's power turns off
automatically.
If the LCD monitor has turned off to save power, pressing any camera
button or tapping the LCD monitor will turn it on again.
If the camera's power has turned off to save power, you can turn it on
again by pressing the power button or hold down the again by pressing the power button or hold down the < again by pressing the power button or hold down the <x> button for at
least 2 sec.
The Power/access lamp will blink when you set the power to The Power/access lamp will blink when you set the power to The Power/access lamp will blink when you set the power to
<1> and turns off when you are using power. When the LCD > and turns off when you are using power. When the LCD > and turns off when you are using power. When the LCD
monitor turns off, the Power/access lamp will turn green. monitor turns off, the Power/access lamp will turn green. monitor turns off, the Power/access lamp will turn green.
206
5
Under the Under the [52] tab, select [Power Under the [ [5
saving saving], then press < saving], then press <Q/0>. ], then press <
Select the desired setting for [ Select the desired setting for [ Select the desired setting for [LCD auto
off off off] and [ off off] and [Camera auto off], then press off] and [ off] and [ ] and [
<Q/0>. < <
[Camera auto off] is the auto off time
after the LCD monitor turns off.
x
<x