Adjust To Lens - Samsung SCO-2080N User Manual

Overview
Notes
again.
tightened correctly.
BACK
Connect the power as specified for each model here.
Video output terminal : Video signals are output through this port. Connect
this port to the Video IN port of a monitor.
RS-485 control terminal :
You can control SETUP MENU through this port by using external controllers like a
Remote controller that RS-485 Communication is supported. For details, see page 14.
COLOR CCD CAMERA
10
User Guide
Adjust the lens's zoom and focus
1. Remove the sunshield from the camera.
2. Remove the front cover from the camera by turning it counterclockwise.
3. Unlock the Zoom or Focus lever before adjusting the lens.
4. Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE)
and clockwise for (WIDE & FAR) position.
5. After adjustment, tighten the zoom or focus levers, taking care not to adjust the
zoom/focus position.
6. Please, close and tighten the front cover.
7.Replace the sunshield.
Front cover
Notes
COLOR CCD CAMERA

Adjust to Lens

Focus lever
11
User Guide