Thermal Arc 181i FABRICATOR Service Manual page 3

Read and understand this entire Manual and your employer's safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
Service Manual Number 0-5152 for:
Thermal Arc Fabricator 181i Inverter Plant
Thermal Arc Fabricator 181i Inverter Power Source (unpacked) Part Number W1003185
Published by:
Thermadyne Industries, Inc.
16052 Swingley Ridge Road, Suite 300
St Louis, Mo63017
USA
www.thermadyne.com
Copyright 2011 by
Thermadyne Industries, Inc.
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the pub-
lisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
Publication Date: April 27, 2011
Revision AB Date: April 06, 2012
Record the following information for Warranty purposes:
Where Purchased:
Purchase Date:
Equipment Serial #:
!
WARNINGS
____________________________________
____________________________________
____________________________________
Part Number W1003186