HP 9122D Service Manual page 57

91220-8
SERVICE
NOTE
Supersedes: N/A
91220
APPlIES TO:
Flll Units:
)(
Only Uniu on Flgreement:
3 1/2 Inch Floppy Disc Drive
Serial number:
2614A and above
Torque specification for
09123-69101
drive mechanisms.
Situation:
PERFORM:
Inmediltely: At PM/Norm,l
On Failure:
Informat ion
WARRANTY: EXTElaO
NQIMt.l
LFl80~:
PARTS:
-
TRAVEl :
SERVICE
~eturn
for Update:
Use
INVENTORY:
Return for Salvage: See
WARRANTY EXTElaO UNTIL:
H/A
C,ll :
Only:~
NONE
X
X
)(
as is:~
Te}(t:
The- new slim-line Sony
3
1/2 Inch floppy drive mechanism, HP exchange par-t number
09123-69101,
is susceptible to damaging the threads in the drive mechanism when
the mounting standoffs ar-e attached.
Solution:
The drive casting threads may be damaged
if
the_sta~doffs are tightened
the
6.5
inch-pound or-
0.734
newton-meter torque specification. If there is
of measuring the torque when attaching the standoffs to the drive mech,
hand tighten the standoffs. DO NOT OVERTIGHTEN.
RP
5-10-86
beyond
no way
firmly
(b~ ~i~K':~~
~OR MORE INfORMATION, CALL YOUR LOCAL HP SALES OR SERVICE OfFICE or East (201) 265-5000, Midwest (312) 255-9800, South
(~o.)
955-1500, west (213) 970-7500 or (.15) 968-9200 OR WRITE,Hewlett-Pack.rd,1820 Embarcadero, Palo Alto, Californl'
IN EUROPE, CALL YOUR LOCAL HP SALES or SERVICE OFFICE OR WRITE, Hewlett-Packard S.A. ,7,rue du BOis-du-Lan,P.O. Box,
CH-1217 Meyrin 2-Gene v a,Switzerl.nd. IN JAPAN, Yoko9awa-Hewlett-Packard Ltd., 1-27-15, Yabe Sag.mih.r. Clty,
Kanag.w. Prefecture, Japan 229.