Seeley MagIQtouch Installation Manual
  1. Manuals
  2. Brands
  3. Seeley Manuals
  4. Network Router
  5. MagIQtouch
  6. Installation manual

Seeley MagIQtouch Installation Manual

Hide thumbs Also See for MagIQtouch:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
INSTALLATION MANUAL
MagIQtouch Controller
Original English Instructions

Advertisement

Table of Contents
loading

Related Manuals for Seeley MagIQtouch

Summary of Contents for Seeley MagIQtouch

  • Page 1 INSTALLATION MANUAL MagIQtouch Controller Original English Instructions...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS CABLE LENGTHS MOUNTING THE MAGIQTOUCH CONTROLLER CONNECTING THE MAGIQTOUCH CONTROLLER SINGLE COMPONENT INSTALLATION (NO ZONES) MULTIPLE COMPONENT INSTALLATIONS OPERATION SCREENS SETTINGS MENU GENERAL MENU COOLER & HEATER MENUS SERVICE MENU CONTROLLER OR SYSTEM RESET MANAGING COMPONENTS ADDING COMPONENTS...

  • Page 3: Cable Lengths

    / " Seeley International cooler or heater ILL1583-C • Cables used for the MagIQtouch Controller are 26AWG, 7/0.16, 6 core flat. • 20m/66" cable is supplied with each Seeley cooler or heater. • Supplied cables should not be altered. ALWAYS route cables at least 300mm / 12" away from regular power cables and high power machines.

  • Page 4: Mounting The Magiqtouch Controller

    MOUNTING THE MAGIQTOUCH CONTROLLER The MagIQtouch Controller should be placed approximately 1.5 metres above the floor, in the most used room of the home. Placement is critical for correct functioning of the temperature sensing thermostat inside the Controller. The following points must be taken into consideration: •...
  • Page 5 MOUNTING THE MAGIQTOUCH CONTROLLER cont Remove the mounting bracket from the rear of the MagIQtouch Controller. STEP 1 ILL1584-A STEP 2 ILL1585-A STEP 3 ILL1586-A MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...
  • Page 6 MOUNTING THE MAGIQTOUCH CONTROLLER cont Using the bracket as a template, mark the centre points for the screw and cable access holes. ILL1587-A Important! The cable hole should be positioned centrally within the rectangular window in the mounting bracket. ILL1597-A...
  • Page 7 Insert wall plugs into holes. Align and screw the bracket into position using the supplied screws. ILL1590-A ILL1589-A Alternatively, a standard stud mounting bracket (used for wall plates) can be used with plasterboard walls. ILL1591-A MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...
  • Page 8 MOUNTING THE MAGIQTOUCH CONTROLLER cont Draw the cable through the wall cavity to the hole made at the wall bracket. Connect the cable to the wall control and mount the wall control onto its bracket. ILL1592-A Important! Take care not to damage the cable or plug during this process.
  • Page 9 Slide and align the wall control over the protruding bracket tabs. Pull the wall control down so the bracket tabs engage and locate with the keyway slots on the rear. STEP 1 ILL1593-A STEP 2 ILL1594-A MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...

  • Page 10: Connecting The Magiqtouch Controller

    SINGLE COMPONENT INSTALLATION (NO ZONES) Ensuring the MagIQtouch Controller is properly connected power up the heater/cooler. ILL1595-A To activate the MagIQtouch Controller screen, press the button to the right. ILL1521-B Note! The following images are examples only of some of the screens that may be displayed in the System Installation Process.
  • Page 11 Start by selecting either “DEFAULT SINGLE COMPONENT” when installing a single heater or single cooler with no additional components, or “MULTIPLE COMPONENTS” for any other system types. ILL1611-B MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...

  • Page 12: Multiple Component Installations

    When prompted, the MagIQtouch Controller will do a scan to find the component (heater/cooler). If no component is found, the MagIQtouch Controller will display the error. Check connections and power and RETRY. If successful, the MagIQtouch Controller will display what it has found for confirmation.

  • Page 13: Operation Screens

    OPERATION SCREENS Select primary mode (COOL/HEAT/FAN ONLY): ILL1613-B Turn system on & off: ILL1614-B Adjust temperature: ILL1615-B MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...
  • Page 14 OPERATION SCREENS cont Access advanced display: ILL1616-B Choose between MANUAL or PROGRAM modes or access SETTINGS menu: ILL1617-B For detailed information on the operation screens refer to the MagIQtouch Controller Owner’s Manual.

  • Page 15: Settings Menu

    SETTINGS MENU The SETTINGS menu contains a GENERAL menu relating to the MagIQtouch Controller and the system as a whole, COOLER and HEATER menus depending on what has been installed, and a SERVICE menu containing component details and fault information.
  • Page 16 SETTINGS MENU cont The current status is listed on the right, close to the arrow buttons. ILL1599-B If you want to change a setting or access a menu item, press the arrow button. ILL1621-B Some menu items are locked with a pin code to discourage customer access.

  • Page 17: General Menu

    GENERAL MENU The GENERAL menu includes settings or information related to the MagIQtouch Controller, or the system as a whole. ILL1623-B • Time and Date • Language. • °C / °F (temperature unit) • Child Access Lock (set a pin to restrict access).

  • Page 18: Cooler & Heater Menus

    COOLER & HEATER MENUS The COOLER and HEATER menus include settings or information related to the specific Seeley International cooling or heating products installed within the system. More information about the specific settings of these products is provided in the separate product installation guide.
  • Page 19 Also included in this menu is access to a ‘Service Operating Screen’ for each component installed in the system. This screen can be used as a troubleshooting tool. ILL1627-A On this screen the status of the component is displayed and can be modified. ILL1628-C MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...
  • Page 20 SERVICE MENU cont Other components of the same type can be accessed by using the scroll left/right buttons. ILL1629-C To access components of a different type, go BACK to the first SERVICE screen where all components are listed and select a different component. ILL1630-A Navigate through the menu as before until you reach the ‘Service Operating Screen’.

  • Page 21: Controller Or System Reset

    CONTROLLER OR SYSTEM RESET It is possible to reset the whole system (including all connected components) or the MagIQtouch Controller only. Use a pin or paperclip to press and hold the reset button located at the back of the Controller.

  • Page 22: Managing Components

    MANAGING COMPONENTS ADDING COMPONENTS The MagIQtouch Controller keeps a list of all the installed components and regularly checks that all components are responding. To add a new component, simply connect it to the system and power up. The Controller will detect that a new component has been added and lead you through the set-up process.

  • Page 23: Replacing Components

    MANAGING COMPONENTS cont REPLACING COMPONENTS To replace a faulty component with a new one, disconnect the old component. The MagIQtouch Controller will display a warning message (unless the component has previously been ignored). Choose the ‘IGNORE’ option. ILL1634-B Now connect and power up the new, replacement component.

  • Page 24: Removing Components

    REMOVING COMPONENTS If a component is to be removed from the installation and never replaced, it can be deleted from the MagIQtouch Controller’s memory. Go to the GENERAL menu in SETTINGS. Scroll down to the menu item ‘SYSTEM CONFIGURATION’.
  • Page 25 MANAGING COMPONENTS cont REMOVING COMPONENTS cont At this point, disconnect the component to be removed and press the MODIFY button. This should cause the MagIQtouch Controller to display a warning message where the component can deleted. ILL1638-B Important! This process will permanently delete the component from the system.

  • Page 26: Managing The Magiqtouch Controller

    Choose the ‘EXISTING SYSTEM WITH NEW CONTROL’ option. ILL1639-A The MagIQtouch Controller will scan for one type of component at a time. The operator can skip to the next scan once they see all components of a particular type have been found.

  • Page 27: Connecting A Pre-Used Controller

    CONNECTING A NEW CONTROLLER TO AN EXISTING SYSTEM cont Once all components have been found the MagIQtouch Controller will display a summary list of what it has found. If this configuration is accepted, the Controller will be ready to operate the system.

  • Page 28: Fault Routine

    FAULT ROUTINE When a component in the system experiences a fault, the Controller will be notified and a fault screen will appear. The operator can then chose to resolve the issue or ignore it. ILL1641-B So long as a fault remains in the system, a small fault icon will be displayed at the right hand side of the lower taskbar.
  • Page 29 ILL1643-B ILL1644-B For more information on product specific fault codes, please refer to the installation manual provided with the product or contact a local service agent. MAGIQTOUCH CONTROLLER INSTALLATION MANUAL |...

  • Page 30: Slave Controllers

    SLAVE CONTROLLERS Multiple MagIQtouch Controllers can be used to control individual zones. In such installations there is always one “master controller” located in a nominated “master zone”. All other controllers become “slave controllers”. In such systems certain principles that apply: •...

  • Page 31: Power Outages

    POWER OUTAGES After a power outage the MagIQtouch Controller will prompt you to enter the time and date. If the AUTO RESTART option is switched ON in the general setting menu, the cooler or heater will automatically restart in the last mode it was running in before the outage, even before the time or date is set.
  • Page 32 Australia 1-300-650-644 Technical Support Australia 1-300-650-399 seeleyinternational.com It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice. Please consult with your dealer to confirm the specifications of the model selected. seeleyinternational.com...

Table of Contents