Disassembly For Repair - Kenwood DV-403 Service Manual

1. Assembling and Disassembling the Casing
and Checking C.B.A.s
1-1 Casing Parts and C.B.A. Positions
1-2 Service Positions
Note
To inspect the loading base unit, position the left side
upward (as viewed from the front).
Extension cable(A)
1-3 Disassembling the Tray
1. Turn the lever clockwise.
2. Move the tray in the direction of the arrow until it locks.
3. Release the tab locks on the left and right, then pull out
the tray.

DISASSEMBLY FOR REPAIR

Extension
cable(C)
Extension cable(B)x2
1-4 Disassembling the Front Panel
1. Release the 3 tabs on the bottom.
2. Release the 2 tabs on the left and right.
3. Release the 2 tabs.
4. Disconnect the 2 flexible cables.
1-5 Disassembling the Loading Base Unit
1. Remove the 4 screws.
2. Pull out the loading base unit vertically.
Note
There is a danger of damaging the connectors.
DV-403
3