Table of Contents
Advertisement
1. How to open the tray if it does not come
out. (Fig. 1)
1. Turn the gear ccw in the direction of the arrow in the
drawing through the hole on loading chassis bottom.
2. Pull out the tray frontward by hand when it comes just out.
2. How to Remove the Tray (Fig. 2)
1. Remove the front panel, front chassis, power supply and
the left mecha. frame.
2. Pull out the tray frontward (1) to match the dent of tray
(2) to the protrusions of the mecha. base (3).
3. Remove the tray upward (4).
2
3
Fig. 2
3. How to assemble the Tray (Fig. 3,4)
1. Adjust the position of the plastic cam lifter (1) and main
gear (2) in the drawing (1 so that the traverse unit will
reach the lowest position.
2. Attach the tray in the direction (3, 4) of the arrow in the
drawing.
3. Push the tray backward.
DV-505/DVF-4050/-S
DISASSEMBLY FOR REPAIR
4
1
Fig. 1
3
2
Fig. 3
4
Fig. 4
1
3
Advertisement
Table of Contents
