Commrider7050 Phone call
operation
Answering incoming calls
When there is an incoming phone call, short press MFB button to manual answer
the call.
Automatically answer incoming calls
The Bluetooth Helmet headset has the automatically answer function, after 2 incoming
call ring ones played (about 8 seconds), and if there is not any operations on the head
set, the Bluetooth Helmet headset will answer the phone call automatically.
Rejecting incoming calls
Once hear the ring tone, just press and hold the MFB button for 3 seconds till hear
a "du" tone, release the button, the call will be rejected.
Hang up
In call active state, a short press MFB button can hang up the call.
Last number redial
Quick double press Vol- Button then the Mobile phone will dial out the last call out
number. (only if headset is in standby state, or music play paused state.)
Voice Dial
Quick double press Vol+ Button, then the mobile will prompt you to speak out your
desired name. (only if headset is in standby state, or music play paused state.)
Audio transfer
In call active state, press and hold the MFB button for 3 seconds, after an "du" tone,
the call audio will transfer from the helmet.
Note :
The above function requires the mobile phone supports Bluetooth® A2DP and AVRCP, and please
make sure your Mobile Phone supports Voice Dial before activate Voice Dial function