Power On/Off; Intercom Operation - CDI Commrider 7050 User Manual

Power On/Off

Power on the Bluetooth headset
In power off state, press Control Button and hold it for about 2 seconds, until hear
a "di" tone, release the button, blue indicator will flash to indicate power on
successfully..
Power off the Bluetooth headset
In power on state, press Control Button and hold it for about 8 seconds, until hear a
long "di" tone, all LED indicators will be shut off to indicate the headset is been
powered off.

Intercom operation

Pairing between the
headset and Mobile.
1- Place the mobile phone and the Bluetooth Headset together within 1 meter.
2- Make sure the Bluetooth Headset is off.
3- Press and hold Control Button for about 8 seconds, release until hear a "dudu"
tone, and the Blue LED and the Red LED flashing alternately, then the Bluetooth
Helmet Intercom headset is in pairing state now.
4- Initiate the Bluetooth function of the mobile phone and search the Bluetooth
Headset according to your mobile user manual.
5- From the found devices in your mobile phone, select the device named
"96-7050-00", and then connect to pair with it, when it prompts to enter password,
enter password <0000>.
Once paired successful, LED Indicator will change from Blue/Red alternately to
Blue flashing, and with a "di" tone to note that the Bluetooth Helmet Intercom
headset has connected with your mobile phone. Now you can use the headset to
answer you phone call, or enjoy the music from your mobile phone.
Note :
Pairing password may not necessary for some mobile.
Commrider7050 Bluetooth