Appendix A: Faq - Alfa Network AC1200R User Manual

Appendix A: FAQ

1. How do I configure the Router to access the Internet by ADSL users?
1) First, configure the ADSL Modem configured in RFC1483 bridge model.
2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The
telephone cord plugs into the Line port of the ADSL Modem.
Log in to the Router, click the "Network" menu on the left of your browser, and click
3)
"WAN" submenu. On the WAN page, select "PPPoE" for WAN Connection Type. Type
user name in the "User Name" field and password in the "Password" field, finish by
clicking Connect.
2. How do I configure the Router to access the Internet by Ethernet users?
Log in to the Router, click the "TCP/CP Settings" menu on the left of your browser, and
1)
click "WAN" submenu. On the WAN page, select "DHCP Client" for "WAN Connection
Type", finish by clicking Save.
3. The wireless stations cannot connect to the Router.
1) Make sure the "Enable Wireless Router Radio" is checked.
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the Router is
encrypted.
If the wireless connection is ready, but you can't access the Router, check the IP Address
4)
of your wireless stations.
Figure A-1 PPPoE Connection Type
- 57 -
AC1200R User's Guide