Alfa Network AC1200R User Manual page 39


Note:
If you do not set the key, the wireless security function will still be disabled even if you have
selected Shared Key as Authentication Type.

Key Format - Hexadecimal and ASCII formats are provided here
stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
ASCII format stands for any combination of keyboard characters in the specified length.

Encryption Key - Select which of the four keys will be used and enter the matching WEP
key you have created. Make sure these values are identical on all the wireless stations in
your network.

Radius Server IP Address - Enter the IP address of the Radius server, if 802.1x
Authentication is selected.

Radius Server Port - Enter the port number of the Radius server, if 802.1x Authentication
is selected.

Radius Server Password - Enter the password for the Radius server, if 802.1x
Authentication is selected.
Be sure to click the Apply Changes button to save your settings on this page

WPA - It's the WPA authentication type based on pre-shared passphrase or RADIUS server.

Authentication Mode - You can choose either Enterprise (RADIUS) or Personal
(Pre-Shared Key). The default setting is Personal (Pre-Share Key), it's a passphrase
between 8 and 63 characters. Enterprise (RADIUS), is an authentication via RADIUS
server.

WPA Cipher Suite - When WPA is set as the Authentication Type, you can select TKIP or
AES or AUTO if both encryptions are checked.

Pre-Shared Key Format - You can enter chose either Passphrase (8 ~ 63 characters) or
HEX(64 Characters).

Pre-Shared Key - Enter the matching WEP key you created. Make sure these values are
identical on all the wireless stations in your network.
Figure 4-20
- 34 -
AC1200R User's Guide
.
Hexadecimal format