Download Print this page

Accessory Power ReVIVE Refresh Instruction Manual

4a

Advertisement

Quick Links

INSTRUCTION MANUAL

Advertisement

loading

Summary of Contents for Accessory Power ReVIVE Refresh

  • Page 1 INSTRUCTION MANUAL...
  • Page 2 Thank you for purchasing the Accessory Power Refresh Bat- tery Charger. This light-weight and compact device allows you to charge up to 4 AA or AAA rechargeable batteries at a time and comes with power adapters for your home and car. A con- venient charging status LCD display shows a meter to indicate charging progress.
  • Page 3: Innovative Features

    Innovative Features - The Refresh Battery Charger can charge 1, 2, 3 or 4 AA or AAA Ni-MH or Ni-CD batteries at a time. - A Microcomputer IC Chip controls charging processes. The intelligent chip will cut off charging when the batteries are full and automatically convert to trickle charging mode.
  • Page 4: Battery Charging

    Inserting your batteries into the Refresh Charger: Open the (2) battery compartment lid and insert your batteries while align- ing them to match the + and – diagrams in the charging slots (fi g. 2-2). You can charge 1- 4 AA/AAA batteries in the Refresh Charger at a time. If you are charging AAA batteries, please use the smaller of the two charging slots.
  • Page 5: Troubleshooting

    Battery Charging (cont’d) Battery Status LCD ERROR fig. 3 This symbol indicates that the batteries are properly receiving power from the Refresh Charger This symbol indicates that there is an issue with one or more of the inserted batteries. Please ERROR re-insert batteries one by one to ensure there is no problem.
  • Page 6 Troubleshooting (cont’d) - Short circuit protection prevents the batteries from short-circuiting the charger when incorrect polarity makes contact. - A new battery can reach maximum charging potential after 2 to 3 cycles. - If a battery is stored for over one week, the battery may lose some power. Recharge the battery before use.
  • Page 7 Product Specifi cations Size: 4.52”x2.59”x1.22” (LxWxH) Weight: 80g (without battery) 1. Input: 12V DC 500mA 2. Output: AA 1.2VDC 1600mA, AAA 1.2V DC 800mA 3. When unloading battery: 50mA MAX 4. When all channels are charging batteries: 500mA MAX 5. Charging suffi ciency of battery: ≥80% 6.
  • Page 8 (C) 2010 ACCESSORY POWER All trademarks and brand names are the property of their owners.