Accessory Power ReVIVE ReLOAD EXT User Manual

ReLOAD EXT
USER GUIDE
Quick Start Instructions:
The ReVIVE™ ReLOAD EXT™ compact lithium-ion battery
charger is great for use with batteries from your smartphone,
camera, radio and other devices. It can charge lithium-ion bat-
teries that are between 3.6v – 4.2v and supports batteries up
to 2.5-inches in length.
Charging your battery is simple:
1- Locate the positive(+) and negative(-) metal contacts on your battery.
2- Match them to the 2 moving metal pins of the ReLOAD EXT charger, located under
the status LCD screen.
3- The ReLOAD EXT is equipped with a spring-loaded battery holder. Just pull it
downwards and insert your battery so that it is secure, making contact between the
moving pins of the ReLOAD EXT and the metal contacts of your battery.
4- Once your battery is properly seated and secure, flip-down the AC plug on the
back of the ReLOAD EXT, and insert into an AC wall outlet.
5- The status LCD screen will begin to show an animation of a charging battery to
indicate power flow. You can check the status LCD screen at any given time to see the
charging status of your battery. There are 3 bars that will fill, and after your battery is
fully charged, the charging animation will stop.
PLEASE NOTE:
Charging times will vary, but most batteries will fully charge within 2-5 hours.