Description The IW-28 SUB is a thin bezel, in-wall, passive subwoofer that has dual 8” long throw woofers, a ¾” reinforced MDF baffle and a switchable Low- Pass crossover that will provide you years of enjoyment. The IW-28 SUB is...
(i.e. one near a corner, one towards the middle of a wall) to Since the IW-28 SUB can't easily be moved once it’s installed (!), very care- smooth out the bass and minimize random standing wave patterns. (see ful consideration should be given to its placement.
IW-28 SUB. Run another set from the receiver’s right speaker any system connections. terminals to the other set of terminals on the IW-28 SUB. (see fig. 5) It does not matter which set of terminal on the IW-28 SUB is considered ‘right’ or Speaker Connection ‘left’.
The IW-28 SUB does not require a back-box. It is designed to work prop- 5) It does not matter which set of terminal on the IW-28 SUB is considered erly in a standard full-sized wall cavity. This is commonly called an “infinite ‘right’...
12-18”. Use screws for at least a full stud bay on either side of where the IW-28 SUB will be mounted. Continue to tighten until the frame is snug in the wall. You want the bezel to conform to the wall surface, and the frame not to rattle from the speaker’s...
Specifications are those in effect at the time of printing. As part of our ongoing program of continuous product improvement, Atlantic Technology reserves the right to change specifications or appearance at any time without notice or obligation to modify existing product..
To obtain Warranty service: Please contact your local Atlantic Technology reseller to deter- First, we’ d like to thank you for purchasing an Atlantic Technology product. We wish you mine if they are an Authorized Repair Center for Atlantic Technology products. You will need many years of enjoyment and satisfaction from it.
Need help?
Do you have a question about the IW-28 SUB and is the answer not in the manual?
Questions and answers