Adjust The Modeling Lamp Depending On Flash Output; Switch The Audio Button On And Off - Foto Walser walimex pro VC-200 PLUS Instruction Manual

1. Switch on device.
See Switch the device on and off.
2. Turn control button OUTPUT POWER until the digital display shows the
desired output. When the device reaches the adjusted flash output,
READY lights up.
3. Trigger test flash:
Press push-button TEST.
The READY signal goes out and lights up not until the device will reach the
adjusted flash output again.

10.2. Adjust the modeling lamp depending on flash output

You can adjust the modeling lamp via 50 values.
1. Switch on device.
See Switch the device on and off.
2. Press control OUTPUT POWER once.
• The modeling lamp switches on.
• The signal MODEL lights up.
3. Turn control OUTPUT POWER until the modeling lamp reaches the
desired power. The display shows the respective flash output.
4. Switch off modeling lamp:
Press control OUTPUT POWER twice.
• The modeling lamp goes out.
• The signal MODEL goes out.
10.3. Adjustment of modeling lamp independent from flash output
You can adjust the modeling lamp via 50 values.
Switch on device.
See Switch the device on and off.
5. Press control OUTPUT POWER twice:
17
6. The modeling lamp switches on.
• The signal MODEL lights up.
7. Press push-button MODEL
modeling lamp reaches the desired power.
The digital display OUTPUT POWER shows the current power of the
modeling lamp for 1 – 2 s and switches to the flash output automatically.
8. Switch off modeling lamp:
Press control OUTPUT POWER once.
• The modeling lamp goes out.
• The signal MODEL goes out.

10.4. Switch the audio button on and off

1. Switch on device.
See Switch the device on and off.
2. Switch on audio signal:
• Press push-button AUDIO.
The display shows the signal AUDIO.
A short beep can be heard when reaching the adjusted flash output.
3. Switch off audio signal:
Press push-button AUDIO.
• The signal AUDIO goes out.
• After triggering a flash, the modeling lamp goes out for a while and
lights up again, when the device has reached the adjusted flash output
again.
• A short beep can be heard when reaching the adjusted flash output.
or push-button MODEL until the
18