Intramural Interface Circuit; Mounting - Sebury K3 User Manual

K3/K4 user s manual
External Push Switch
Magnetic Contacts
Alarm
Keypad:
12 keys
Programming memory:
Non volatile Eeprom memory
IMPORTANT INFORAMTION
There are no user serviceable parts contained within the K3
access control keypad.
If holes are to be drilled before mounting onto a wall, check for
hidden cables and/or pipes before drilling. Use safety goggles
when drilling or hammering in cable clips.
Every effort has been made to provide accurate information,
however slight variations can occur. We also reserve the right to
make changes for product improvement at any time
NOTE
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO INSTALL THE K3/K4
2 www.sebury.com.cn

Intramural Interface Circuit

1. Alarm output interface (See Figure 1)
Q
R
2K
GND
2. Electric lock interface (See Figure 2)
RELAY

Mounting

1. Attach the rear plate to a single or double gang electrical box or
secure to the wall firmly with at least three flat head screws.
2. When wiring has been completed, attach the front cover to the
rear plate.
K3/K4 user s manual
ALARM
Figure 1
NC
NO
Figure 2
COM
www.sebury.com.cn 3