Setting The Alarms; Snooze Function; Turning Off The Alarm - Naxa NRC-166 Instruction Manual

Setting the Alarms

1. With the unit in CLOCK mode (i.e., the ra-
dio is off), press the AL1/+ button to set
Alarm 1 (or press AL2/− to set Alarm 2).
The ALARM time will begin to flash on the
display.
2. Press the HOUR/TUN+ button to adjust
the alarm hour; press the MIN/TUN− but-
ton to adjust the alarm minute.
3. When the desired alarm time is set, press
the AL1/+ button to confirm (or AL2/−).
4. Press the AL1/+ button (or AL2/−) to tog-
gle between "wake to buzzer" or "wake
to radio" modes. The current alarm wake
mode is indicated on the display.
Page 6

Snooze Function

1. Whenever the alarm (radio or buzzer) ac-
tivates, it can be temporarily suspended
9 minutes by pressing the SNOOZE/SLEEP
button once.
2. The buzzer or radio will then sound again
automatically after 9 minutes. This pro-
cedure can be repeated for up to approxi-
mately one hour.

Turning off the Alarm

Press the SOURCE/AL.OFF button to turn the
alarm off when it sounds.
Naxa Electronics