Setting The Clock; Battery Backup - Naxa NRC-166 Instruction Manual

Connecting the Unit
to Power
Before plugging in the AC power cord to the AC
wall outlet, make sure that the voltage of your
electricity supply is same as that indicated on
the rating plate.

Battery Backup

Battery backup will preserve the current time,
alarm settings, and stored radio stations in the
case of power failure or interrupted AC power.
Insert two UM-4 batteries (AAA) into the bat-
tery compartment. Be sure to observe the
proper polarity (the "+" and "-" signs) as indi-
cated inside the battery compartment.
www.naxa.com

Setting the Clock

1. With the unit in CLOCK mode (i.e., the ra-
dio is off), press and hold the CLK/MEM
button for about 1 second. The time will
begin to flash on the display.
2. Press the HOUR/TUN+ button to adjust
the hour; press the MIN/TUN− button to
adjust the minute.
3. When the correct time is set, press the
CLK/MEM button again to confirm.
Page 5