Advertisement
Check that the parts are complete and intact when unpacking.
•
If you want to use the electric heater as a mobile unit, please install the casters
•
provided in the package. Ensure that the heater is correctly fixed with the screws
provided. Please ensure that the base is level, stable and clean. Please note the safe
distance mentioned below.
1.
Stand the product upside down on soft carpet or some other
soft padding.
2. Mount the stand in the corresponding location of the lower
part of the product as shown to the right. Once in place, fix
the screws into the bottom of the product with a screwdriver
and tighten.
1.
Take the wall brackets and expansion screws from the box, then fix the screws onto the
wall according to the distances between the holes on the wall brackets, as depicted in
the picture below.
2. Aim the 4 holes in the back of the machine to the 4 hooks on the wall bracket, then push
them on, then slide into the slot to click on, as shown below.
3. Fix the wall bracket lock piece onto the bracket with screws. Slide the lock piece into the
locking slot on the back of the machine, then tighten up the screws as shown in the
picture below.
Wall Bracket
Lock Piece
Hook
Hook
2
Expansion Screw
Expansion Screw
Advertisement
