Maintenance; Warm Restart; Factory Default; Software Upload - Net Generation NG-PGS164W User Manual

Maintenance

Warm Restart

Press Yes button to restart the switch, the reset will be complete when the
power lights stop blinking.

Factory Default

Forces the switch to restore the original factory settings. To reset the switch,
select "Reset to Factory Defaults" from the drop-down list and click Apply. The
LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their
factory

Software upload

Select "Upgrade Firmware" from the Tools drop-down list then click on the
"Browse" button to select the firmware file. Click the APPLY button to upgrade
the selected switch firmware file. User can download firmware files for user's
switch from the Support section of your local supplier.

Configuration File Transfer

Configuration file transfer allows you to save the switch's current configuration
or restore a previously saved configuration back to the device. Configuration
Figure 4-1
Figure 4-2
Figure 4-3
32