Net Generation NG-PGS164W User Manual page 13

Figure 2-1
MAC Address: Displays the unique hardware address assigned by
manufacturer (default).
S/W Version: Displays the switch's firmware version.
H/W Version: Displays the switch's Hardware version.
DHCP Enabled: Click the box to enable DHCP
Fallback IP address: Manually assign the IP address that the network is
using. The default IP is 192.168.2.1
Fallback Subnet Mask: Assign the subnet mask to the IP address
Fallback Gateway: Assign the network gateway for industrial switch. The
default gateway is 0.0.0.0.
Management VLAN: ID of a configured VLAN (1-4094) through which you
can manage the switch. By default, all ports on the switch are members of
VLAN 1. However, if the management VLAN is changed, the management
station must be attached to a port belonging to this VLAN.
Name: Type in the new user name (The default value is 'admin').
Password: Type in the new password (The default value is 'admin').
SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP
version 1and 2c management clients.
9