Qos - Net Generation NG-PGS164W User Manual

QoS

In QoS Mode, select QoS Disabled, 802.1p, or DSCP to configure the related
parameters.
QoS Configuration
Strict: Services the egress queues in sequential order, transmitting all traffic
in the higher priority queues before servicing lower priority queues.
WRR: Weighted Round-Robin shares bandwidth at the egress ports by
using scheduling weights with default values of 1, 2, 4, 8 for queues 0
through 7, respectively. (This is the default selection.)
※ Note: WRR can only be selected if Jumbo Frame mode is disabled on the
Port Configuration page
Figure 2-8
18