Net Generation NG-PGS164W User Manual page 23

QoS Mode: QoS Disabled
When the QoS Mode is set to QoS Disabled, the following table is displayed.
QoS Mode: 802.1p
Packets are prioritized using the 802.1p field in the VLAN tag. This field is
three bits long, representing the values 0 - 7. When the QoS Mode is set to
802.1p, the 802.1p Configuration table appears, allowing you to map each of
the eight 802.1p values to a local priority queue (low, normal, medium or high).
The default settings are shown below.
When the QoS Mode is set to 802.1p, the 802.1p Configuration table is
displayed as shown below.
Figure 2-9-2
19