Canon EOS M Basic Instruction Manual page 28

3 Setting the Time Zone, Date and Time
If you remove the battery or the battery is exhausted, the time zone and date/
time might be reset. If this happens, set the Time zone and Date/Time again.
To synchronize the seconds, in step 5, press <Q/0> at 0 sec.
28
Under the [52] tab, select [Date/Time].
2
On the Main Dial, press the <YA>/
<ZO> button to select the [52] tab.
On the Main Dial, press the <Wj/i>/
<XL> button to select [Date/Time], then
press <Q/0>.
Set the date and time.
3
On the Main Dial, press the <YA>/<ZO>
button to select the number to be adjusted.
Press <Q/0> so <a> is displayed.
On the Main Dial, press the <Wj/i>/
<XL> button to set the number, then
press <Q/0> (returns to <b>).
Set the daylight saving time.
4
Set it if necessary.
On the Main Dial, press the <YA>/
<ZO> button to select [Y].
Press <Q/0> so <a> is displayed.
On the Main Dial, press the <Wj/i>/
<XL> button to select [Z], then press
<Q/0>.
When the daylight saving time is set to
[Z], the time set in step 3 will advance
by 1 hour. If [Y] is set, the daylight
saving time will be canceled and the time
will go back by 1 hour.
Exit the setting.
5
On the Main Dial, press the <YA> /
<ZO> button to select [OK], then press
<Q/0>.
The date/time and daylight saving time
will be set and the menu will reappear.