Name And Operations Of Indicators And Controls - Toshiba RAV-SM560KRT-E Owner's Manual

NAME AND OPERATIONS OF INDICATORS AND CONTROLS

Display section
All display items are shown in the figure below for purpose
of explanation.
Only selected items are displayed in actual operation.
(All indicators are displayed for the explanation.)
The displayed contents differ according to shape or type.
4
5
1
CHECK
Displayed during check mode.
2
Set up temperature display
The selected set up temp. is displayed.
3
Unit display
Unit No. in which error/fault is displayed in the
set up temp. display section.
4
Operation mode display
The selected operation mode is displayed.
5
Fan mode display
The selected fan mode is displayed.
(LOW)
(MED.)
(HIGH)
6
Air volume fix display
This is not displayed on this model.
1 2 3
6 7
7
CENTRAL control display
Displayed when used with the central remote
controller, etc.
8
STANDBY display
It is displayed when the operation cannot be
performed though it is not an error.
FILTER display
If "FILTER" is displayed, clean the air filter.
PREHEAT/DEFROST display
Displayed when heating operation or defrost
operation starts.
LOUVER display
It is displayed while the discharge louver
operates in AUTO mode.
LOUVER/MANUAL display
It is not displayed on this model.
4
8