Panasonic VIERA TH-L32D25Z Operating Instructions Manual page 27

Menu Item
MPX
Digital Audio
Preference
SPDIF Selection
MPEG Optical
Level
HDMI1 / 2 / 3
Input
Reset Sound
Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset PC Settings Press the OK button to reset the present PC Setup settings to the default.
H-pos
V-pos
Reset DVI
Position
Settings
Off Timer
Adjustments / Configurations (alternatives)
Selects multiplex sound mode (if available) (p. 68)
●
Normally : Stereo
●
Stereo signal cannot be received: Mono
●
M1 / M2 : Available while mono signal is transmitted
●
Analogue TV mode only
Selects the initial setting for audio tracks (Dolby D / HE-AAC)
Dolby D : The priority is given in the following order - Dolby Digital,
HE-AAC, MPEG1.
HE-AAC : The priority is given in the following order - HE-AAC, MPEG1, Dolby Digital.
●
Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-
channel audio.
●
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
●
MPEG1/Layer-2 is an audio compression method that compresses
audio to the smaller size without any considerable loss of audio quality.
●
Digital TV mode only
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal (Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For Digital TV mode or Video mode (p. 48)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
●
Digital TV mode only
Select to fit the input signal (Digital / Analogue) (p. 69).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
●
HDMI input mode only
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the present DVI Position settings to the
default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
●
Set to the minimum level if noise occurs
27