ECS 945GCT-M User Manual page 27

Surround Display
Init Display
Function
First
PCI-E Card
PCI-E Card
PCI-E Card
Install
WinXP
PCI-E Card
Onboard VGA
PCI-E Card
1. When the driver of onboard VGA is installed first, the primary Graphics in
Windows will be onboard VGA. However, if the driver of add-on PCI Ex-
press Graphics card is installed first, the primary Graphics in Windows will
be add-on PCI Express Graphics card.
2. If you install the add-on PCI Express VGA card, BIOS setup will auto-
matically disable the onboard VGA after loading optimal defaults. To en-
able the Surround Display function, make sure to manually enable onboard
VGA in the BIOS setting.
3. When using surround display, please make sure that "Init Display First"
in "CMOS Setup Utility" should be selected to "Onboard VGA".
ADD2 Card Function
When you want to perform dual view (clone) function, only the following assemble
supports.
Function PCI-E x16 PCI-E x4 Test Result
Dual View
o
(Clone)
Installing the Motherboard
Onboard PCI-E PCI-E
Test Result
VGA x16 x4
x x
o
o x
x
x o
x
x o
o
x o
o
o o
x
x pass
pass
pass
pass
pass
Not support
Not support
Remark
21