Battery Handling Precautions - Polaris GEM Owner's Manual For Maintenance And Safety

Batteries

Battery Handling Precautions

WARNING! Do not work in or near the battery compartment or on any other electrical component of
the vehicle while charging the batteries. Always turn off the main disconnect switch before servicing or
unplugging any electrical components. See page 52. The main disconnect switch will disable the
vehicle by disconnecting the battery pack from the motor. It does not disable the battery pack. HIGH
VOLTAGE will be present at the battery terminals. HIGH BATTERY VOLTAGE IS ALWAYS PRESENT.
DO NOT TOUCH THE BATTERY TERMINALS.
• Always make sure that all electrical accessories are grounded directly to the negative (-)
post on the terminal board. Never use the chassis or body as a ground connection.
• Make sure vent caps are installed properly and securely during vehicle operation and bat-
tery charging.
• Never connect a 12-volt accessory directly to the batteries. Always connect any powered
accessory to a 12-volt auxiliary outlet or terminal board.
(continued on next page)
FEATURES AND CONTROLS
67