Merlin Lcd At A Glance - ENHANCED VISION merlin LCD User Manual

Hide thumbs Also See for merlin LCD:

User manual (40 pages)

User manual (36 pages)

User manual (21 pages)

Table Of Contents

Table of Contents

Enlarged version

to Move Merlin lcD to another location

• If you are repositioning Merlin LCD a short distance across a

desk or table, make sure you do not pull on any power cords or

connector cables.

• Disconnect and secure all power and video cables and lock the

X-Y table before moving the unit.

• Carry Merlin LCD only by the two recessed handles located on

either side of its base. Do not carry it by the lcD monitor

arm.

caring for Merlin lcD

• Always turn the power OFF for the Merlin LCD and the monitor

when the system is not in use.

• Always turn the power OFF before cleaning Merlin LCD.

• The protective glass covering the camera can be cleaned as

needed with the lens cloth provided within the packaging.

Susceptibility to interference:

• There may be temporary degradation of the image when the

Merlin LCD is subjected to a strong radio frequency field,

electro-static discharge or transient electrical noise. An electro-

static discharge (caused by static electricity) may cause the

screen to go black. If this happens, switch the unit off and on

again.

compliance Warnings:

• Electromagnetic compatibility: The use of accessories and

cables other than those specified by Enhanced Vision may result

in increased emissions or decreased immunity.

• Placement of equipment: The Merlin LCD should not be used

adjacent to or stacked with other equipment.

aFety and

are