Dust nozzle set (Accessory)
1. Dust nozzle
2. Thumb screw
Use the dust nozzle for dust extraction. Install the dust
nozzle on the tool base using the thumb screw so that
protrusion on the dust nozzle fit to the notch in the tool
Then connect a vacuum cleaner to the dust nozzle.
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Straight & groove forming bits
Edge forming bits
Laminate trimming bits
Templet guide 25
Templet guide adapter
Collet cone 3/8", 1/4"
Collet cone 6 mm, 8 mm
Dust nozzle set