Liebert 232 User Manual page 22

Module time and date: Shows the current module date and time.
Time since last reset: The amount of time that has elapsed since the last module reset.
CMnet
Communication lost: If "YES", this module has detected that it is alone on this CMnet.
CMnet address: The module's current CMnet node address. This should be set to 1 for the SiteGate-
232.
CMnet baud rate 9600: The module's current CMnet baud rate.
Module Driver Memory
Free: Unused module driver memory.
Used: Memory used by the module driver.
Total: Maximum memory capacity of this module .
Module Driver
No.: This is the GFB number as configured in EDB.
Name: This is the GFB name as configured in Eikon.
Version: This is the version of the GFB. This number is incremented each time the FB is compiled in
Eikon.
Status: There are nine status states which are defined on the Status Page. An X indicates that the
state exists, a dash (-) indicates that it does not exist.
Rate: This number indicates how many times the GFB will execute per minute (Cycles/Minute).
Bytes Used: Indicates how much of the module's memory is used by the GFB.
22
Rev. (08-JULY-98) © 1996-98 Liebert Corporation