I
nstallation
Installation place requirement
Level floor :
Drain Hose
Allowable slope under entire washer is 1˚.
Washer
Power outlet :
Must be within 60 inches (1.5 m) of either
side of the washer. Do not overload the
Laundry
outlet with more than one appliance.
Tub
approx.
Additional Clearance :
2cm
If the washer is installed inside a closet or
alcove, the following clearances are
required:
4 inches (10 cm) rear, 1 inch (2.5 cm) side
Do not place or store laundry products on
top of washer at any times.
They can damage the finish or controls.
650
850
600
6