Operation; Connecting To A Power Source; Starting The Trimmer - Toro 51480 Operator's Manual

•
To adjust the trimmer height, open the height adjustment latch,
then slide the shaft up or down to desired height, securing it in
place with the latch (Figure 4).
•
To adjust the orientation of the base, press down on the rotator
button located at the base of the shaft, then move the base to face
the desired direction (Figure 5).
1
1. Rotator button
G015683
Figure 5

Operation

Each time before you use the mower, ensure that the control bar
operates properly. When you release the control bar, the motor and the
blade should stop. If they do not, contact an Authorized Service Dealer.

Connecting to a Power Source

WARNING
If you do not fully seat the extension cord on the inlet plug, the
loose plug could lead to overheating and cause a fire, possibly
burning you or others.
Ensure that you fully seat the cord on the plug and use the cord
lock feature to secure the cord.
NOTICE! Do not use a damaged cord.
1. Inlet plug

Starting the Trimmer

To start the trimmer, slide the lock switch back to the On position, then
squeeze the trigger (Figure 7).
5
1
2
Figure 6
2. Extension cord