1. Warning
2. Read the Operator's Manual.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
1
Installing the Auxiliary Handle
Parts needed for this procedure:
1.
Position the auxiliary handle on the shaft of the trimmer with the
smooth surface facing the operator (Figure 1).
3. Do not use in wet environments.
4. Do not use if cord is damaged.
Description
Auxiliary handle
Latch
Brace
Guard
Phillips head screw
Wire edge guard
No parts required
ID-1007
Qty.
1
1
1
1
1
1
–
1. Auxiliary handle
2. Latch
3
5. Wear eye protection.
Use
Install the auxiliary handle.
Mount the guard to the base of the trimmer.
Install the edge guard.
Adjust the trimmer height and base
orientation.
1
Figure 1
3. Brace
2
3